- Product Name:
Address: No.8,Jingsheng Road,Jingkou Industry Park,Shapingba District,Chongqing,China
ZipCode: 400033
Tel : 023-61727399
Fax: 023-65305486
centrifugal pump
Select 
to 
or 
View list
items per page
-
-
21.Mechanical Diaphragm Metering Pumps
The series JM mechanical diagram metering pumps adopts cycloidal-pin wheel reducer.The pump head materials include engineering plastics and stainless steel.Maximum discharge pressure is 1.3MPA.Capacity ...
Category:-> Metering pumps
-
-
22.SDZ Sectional Pump
SDZ Sectional Pump With dramout inner casing and rotor Capacity ranges from 200m3/h to 1000 m3/h. head from 1200m to 3200m. suitable for descaling of rolled steel. Boiler feed, oil transfer, oilfield water...
Category:-> High-pressure descaling system
-
-
23.SD Double Casing Pump
SD Double Casing Pump Capacity ranges from 200m3/h to 500m3/h, head from 1000m to 2700m,suitable for descaling of rolled steel, boiler feed,and hydrocarbon transfer at normal atmospheric temperature.
Category:-> High-pressure descaling system
-
-
24.ZDS Hi-pressure self-balance multistage centrifugal pump
ZDS Hi-pressure multilevel pump series have four kinds of self-balance structure: the sectional, the volute type double casing, the double casing type with drawout inner casing and rotor, and the horizontal spl...
Category:-> Hi-pressure centrifugal pump
-
-
25.Metering plunger pump
complete range of specification. Metering pump is classfied into plunger type and diaphragm type with 22 transmission case serieses and 3000-odd specifications,capacity from 0.2 to 300...
Category:-> Metering pumps
-
-
26.Plunger metering pump
J metering pump is classified as plunger type and diaphragm type ,covering 25 frame series and more than 4000 specifications. Capacity ranges from 0.2~30000L/h ,macimum discharge pressure up to 50Mpa,fluid temp...
Category:-> Metering pumps
-
-
27.electronic control plunger metering pump
J metering pump is classified as plunger type and diaphragm type ,covering 25 frame series and more than 4000 specifications. Capacity ranges from 0.2~30000L/h,maximun discharge pressure up to 6000mm2/s. J met...
Category:-> Metering pumps
-
-
28.Multiplex metering pump
This tyoe of pump are according to our metering pump to in Series Structure.flow: 0.2~30000L/h Max discharge pressure:50Mpa This kind of pump are made of same machine type,paramater ,different machine type ,pa...
Category:-> Metering pumps
-
-
29.6 Multiplex metering pump
Metering pump is classified as plunger type and diaphragm type,covering 25 frame series and more than 4000 specifications. Capacity ranges from 0.2~30000L/h .maximum discharge pressure up to 50Mpa,fluid tempera...
Category:-> Metering pumps
-
-
30.High temperature metering pump
Heat resistance Suitable for fluids of high temperature and with viscosity which varies as the temperature changes, being solidifiable and needing insulating. ◇ Preventing heat radiating to the powe...
Category:-> Metering pumps
-
-
31.High-viscosity metering pump
Two main types: the plunger and the diaphragm. Use of pre-compression type valve set and rational passage area according to the viscosity of medium. Single-cylinder capacity range: 0.2 ～ 30000 L/h Maximum disch...
Category:-> Metering pumps
-
-
32.High-viscosity metering pump
Single-cylinder capacity range: 0.2 ~ 30000 L/h Maximum discharge pressure: 50 MPa Maximum viscosity: 6000mm2/s metering pump is classified as plunger type and diaphragm type, covering 25 frame seri...
Category:-> Metering pumps
-
-
33.Diaphragm metering pump
Suitable for fluids of high temperature and with viscosity which varies as the temperature changes, being solidifiable and needing insulating. Preventing heat radiating to the power frame. Jackete...
Category:-> Metering pumps
-
-
34.Diaphragm metering pump
Suitable for fluids of high temperature and with viscosity which varies as the temperature changes, being solidifiable and needing...
Category:-> Metering pumps
-
-
35.Slurry metering pump
Without wear of plunger and leakage of fluid, the pump increases in lifetime and reliability. Even flowing type c...
Category:-> Metering pumps
-
-
36.Slurry metering pump
Without wear of plunger and leakage of fluid, the pump increases in lifetime and reliability. Even flowing type c...
Category:-> Metering pumps
-
-
37.Sulfur metering pump
Full insulating structure The jacketed pump head and hollowed plunger are filled with hot medium to avoid solidificati...
Category:-> Metering pumps
-
-
38.advection metering pump
J metering pump is classified as plunger type and diaphragm type, covering 25 frame series and more than 4000 specifications. Capacity ranges from 0.2 ~ 30000L/h, maximum discharge pressure up to 50Mpa, fluid t...
Category:-> Metering pumps
-
-
39.Advection metering pump
J metering pump is classified as plunger type and diaphragm type, covering 25 frame series and more than 4000 specifications. Capacity ranges from 0.2 ~ 30000L/h, maximum discharge pressure up to 50Mpa, fluid...
Category:-> Metering pumps
-
-
40.Pneumatic control metering pump
Consisting of metering pump, pneumatic positioner, directional valve, pneumatic motor, silencer set, mechanical controlled stroke valve, position feedback set, smart controller, etc. The pneumatic servo regulat...
Category:-> Metering pumps
Select to or
View list
items per page
Didn't find what you are looking for? Post a buying lead.
China manufacturer of centrifugal pump in www.cqpumps.com for global buyers. High quality and products assurance Made in China.centrifugal pump supplied by Chinese manufacturer with the most competitive price and super quality. Listings will lead you to crucial data such as company introduction, main products, target market, contact information, certifications and so on.
English
German
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian